Solu-P-L-K-S TECHNOLOGY:

Solu-P-L-K-S is a low pH soluc/Fulvic acid soil conditioner based on fermented and extracted natural compounds and organic matter substrates and derivatives.

 

BENEFITS of Solu-P-L-K-S

1. Natural, organic, and biodegradable ingredients
2. Helps in macro and micronutrients solubility and availability for the plants and micro-organisms.
3. C/N ratio is maintained at less than or equal 20 for enhanced microbial activity.
4. Very stable at low pH

Solu-P-L-K-S is not a plant food product

ACTIVE INGREDIENTS:

Soluc/Fulvic Acid derived from Leonardite              6.0%
Additional Organic Matter                                           15.0%
Total Active Ingredients                                              21.0%
Total Inactive Ingredients                                           79.0%

 

 

DIRECTIONS FOR USE:
Solu-P-L-K-S is recommended for use on all soils and plants.  Solu-P-L-K-S may enhance nutrient availability and microbial activity. Solu-P-L-K-S is designed for foliar application and for injection through chemigation and sprinkler systems.                                                              
Sprinkler Irrigation: Apply at the rate of 1-2 gallons/acre with irrigation water. 

Foliar Application: Dissolve the recommended amount of Solu-P-L-K-S in at least 25 gallons water per acre.

Aerial Application: Dissolve the recommended amount of Solu-P-L-K-S in at least 8 gallons water per acre.
Soil Mark-out Application: Solu-P-L-K-S is essential to complex macro and micronutrients applied early in the season. Mix 1/2-1 gallons of Solu-P-L-K-S with the fertilizers (10-34, 3-18-18 or phosphoric acid) and apply in furrow to maximize the nutrients availability.

Potatoes and Sugar Beets: Apply 1/2-2 gallon/acre.
Grain Crops: Apply Solu-P-L-K-S at the rate of 1/2-2gallon/acre.
Greenhouse crops: Inject 1-2 gallons of Solu-P-L-K-S in drip irrigation system.
Turf: Apply 4-6 OZ/1000 ft2.

Compatibility: Solu-P-L-K-S is compatible with most fertilizers (including phosphates) and registered pesticides. However, compatibility jar test and small plot test is recommended before large-scale treatments are started. Always refer to products label. TANK MIXING Fill the tank with half the water, add Solu-P-L-K-S and agitate to dissolve. Add dry formulations and dissolve, follow by liquids.  Bring to volume with water. After thorough mixing, allow this mixture to stand for 5 minutes. If the combination remains mixed or can be readily remixed, it is physically compatible. Once compatibility has been proven, use the same procedure for adding products to the spray tank.  

IMPORTANT NOTICE TO PURCHASER:  Seller’s and manufacturer’s only obligation to a purchaser or user of this product shall be to refund the purchase price, or to replace the quantity purchased, of any defective product.  In no event shall Seller or manufacturer be liable to a purchaser or user of this product for any claim for any economic, indirect, special, incidental or consequential damages, or for any injury, loss or damage, direct or indirect, to any person or property.  Purchaser of this fertilizer material expressly acknowledges and agrees to these terms.

Solu-P-L-K-S is a registered
Trademark
AgSciTech
365 North 600 West
Logan, Utah 84321